Hard Drives: SATA

SATA connections/controllers are being included on more and more motherboards and OEM systems lately, and this trend is only going to continue in the future. With SATA drive prices often identical to the same type of drive utilizing PATA, there's no real reason to shy away from this new interface.

Samsung's 160GB 7200RPM 8MB SATA drive wins the price wars this week at under $100, pushing aside the likes of Seagate and Maxtor. In this case, it is worth noting that as an OEM offering, this drive does not include the necessary SATA data cable. Keep this in mind if your motherboard or system did not come bundled with any cables. It's also important not to forget that many, if not most, onboard SATA controllers require drivers for Windows to recognize any connected drives. As SATA becomes more prevalent, this detail will eventually go away, but for now, it's here and quite likely the cause of one too many RMAs.



Hard Drives: Parallel ATA Hard Drives: SCSI
Comments Locked

9 Comments

View All Comments

  • PrinceGaz - Saturday, August 28, 2004 - link

    @sprockkets: unless your Maxtor drives are really ancient and use a stepper-motor to move the heads, you have no need to worry about them. All drives these days automatically move the heads by default to a safe place simply by removing the power.

    I'd personally be more concerned about the fact that you treat HDs in a way where that causes them to make any noise while handling them. Handle them like eggs once out the protective foam and you'll have a lot less failures.
  • sprockkets - Saturday, August 28, 2004 - link

    The only thing about those Maxtor drives that worry me is the fact I was moving it around to another computer and I could hear the drive heads scratching the surface of the platters. Why IBM/Hitachi is the only HDD maker who have the heads move completely off the platter when off is beyond me.

  • Reflex - Saturday, August 28, 2004 - link

    Outpost.com has a 250GB Maxtor drive for $119.

    http://shop4.outpost.com/product/3700356

    Got one for myself, its a heck of a deal and man is that drive nice...
  • SpamMagnet - Friday, August 27, 2004 - link

    Nice to know I wasn't as confused as I thought I was... ;-)

    Looking forward to the Pioneer DVR-108D review!
  • AdamRader - Friday, August 27, 2004 - link

    Sorry folks for the mixup. This guide was actually supposed to come out tomorrow with two totally different drives. (The part of both drives being dual layer was also a brain lapse on my part.) This should be resolved shortly.
  • SpamMagnet - Friday, August 27, 2004 - link

    The section on DVD burners mentions the NEC ND-2510A and Plextor PX-712A, then goes on to say "both drives here are ready to go out of the box for dual layer burning".

    I don't know about NEC, but I'm pretty sure the Plextor won't even read DVD+R9 much less write to it.
  • Shalmanese - Friday, August 27, 2004 - link

    Any chance of including a $/gig coloumn for the Hard Drives? Would make comparing different sized drives a bit easier.
  • JarredWalton - Friday, August 27, 2004 - link

    SCSI drives... do enthusiasts still buy those? Anyway, the prices on the Maxtor and Seagate 10000RPM 73 GB drives seem to have swapped places, making the Seagate the better buy at $220. Too bad SCSI controllers and cables still add substantially to the cost, as I would wager the 10000 RPM 73 GB SCSI drives offer slightly better performance and scalability than the Raptor 74 GB.
  • Degrador - Friday, August 27, 2004 - link

    The Pioneer DVR-108 just got released, and is a wonderful 16X dual layer burner at a pretty good price, yet isn't on your pricing engine... I'd be recommending that above the others...

Log in

Don't have an account? Sign up now