Buyer's Guide: High End System - May 2004
by Wesley Fink on May 26, 2004 11:00 AM EST- Posted in
- Guides
Networking
Recommendation: Onboard networkingPrice: $0
The onboard Gigabit networking that you will find on our recommended motherboards is all you will need for a high end system. In this case, the Intel alternate DFI 875B LAN Party really has a better Gigabit solution, since it uses Intel's CSA bus to move the LAN off the confines of the PCI bus. The practical reality is that you will likely find no real difference in the Gigabit LAN provided by either the Asus SK8V or the DFI 875B LAN Party unless you have specialized networking needs. Broadband won't be any faster than the 10/100 solution found on almost any motherboard these days, but Gigabit can be useful when transferring large amounts of data to and from multiple networked computers in an office or within a home network.
Keyboard and Mouse
While trivial, it's still important that you purchase the right keyboard and mouse. Different people have different preferences for a keyboard's look and feel, and the same goes for a mouse. Therefore, we suggest that you personally try out a keyboard and mouse. Recommending purchasing these items online is misleading, as there are too many users with different preferences for this type of thing. Visit your nearest PC outlet to try out a keyboard and mouse yourself; a PC Club, Best Buy, CompUSA, or Circuit City store will do. We suggest that you start with Microsoft and Logitech keyboards and mice. Make sure you also check out optical mice from Microsoft and Logitech as well. A good solid optical mouse from either manufacturer should run about $20, but in some cases, can run as little as $10 if you can find the right deal.There are also some great wireless optical mice out there, like the MX700 for example, but it really depends on whether you care at all about a wireless mouse and are willing to spend the money to acquire it. Most will be satisfied with a standard optical mouse from Microsoft or Logitech for gaming, as it offers identical (or better) precision and feel than most wireless mice. We are bringing up the idea of wireless mice merely because it is hugely popular with gamers nowadays. Otherwise, stick with what makes you comfortable.
If you cannot find the lowest prices on the products that we've recommended on this page, it's because we don't list some of them in our RealTime pricing engine. Until we do, we suggest that you do an independent search online at the various vendors' web sites. Just pick and choose where you want to buy your products by looking for a vendor located under the "Vendor" heading.
59 Comments
View All Comments
MadAd - Monday, May 31, 2004 - link
I just wish you guys would do a 'dream' system, money NO object - us geeks like to dream, even if we cant afford fibre raided flash drives and $2000 sound setups ..... it only has to be like once every 3 months or so, just for drooling rights - awww go on :)Ma10n3 - Monday, May 31, 2004 - link
This comment thread seems to be pretty dead now, but I thought I'd just tack this on...Maybe there should be a high-end gaming system and a high-end everything-but-gaming system.
A lot of newer game engines are SMP capable though, so the two may become one in the near future.
qquizz - Saturday, May 29, 2004 - link
GLARING ERROR ALLOWED TO STAND:As noted days ago in this forum, I can't believe Anandtech has allowed this error not to be changed yet in this sentence in the storage section of the article:
"Those concerned about data security more than ultimate speed can configure the drives as RAID 0, or mirroring."
Ma10n3 - Saturday, May 29, 2004 - link
I wish I could just edit one of the posts above... Anyway, it doesn't really make a whole lot of sense that the Iwill doesn't support DDR400 though because the memory controller is on the processor die. ???But, if the manufacturer doesn't claim it supports it, than it seems reasonable to go with a manufacturer that does. After all, when you're spending this much money on a system, compatibility becomes very important!
Ma10n3 - Saturday, May 29, 2004 - link
Uh, scratch the Iwill board. It only supports up to DDR333!Looks like the TYAN Thunder K8W is about the only choice.
Ma10n3 - Saturday, May 29, 2004 - link
Roostercrows, another motherboard that supports all the features listed above is the Iwill DK8X.Can't seem to find any others...
Ma10n3 - Saturday, May 29, 2004 - link
#52, If you are considering a dual-opteron setup, than I should also let you know that the only mobo I could find that uses the NUMA (microsoft.com has quite a bit of info on NUMA) configuration and has AGP8X, PCI-X, and legacy PCI is the TYAN Thunder K8W. If anyone knows of any others that have all these features, please post the info.roostercrows - Saturday, May 29, 2004 - link
#50, Yes, I did read all the posts including #39and I didn't mean to imply that you used the term best "bang for the buck". sorry if I gave that impression.
I'm building a new computer and have the dual raptor hard drives and one maxtor 200 GB, power supply from PC power & cooling, video card X800, monitor (not my white wall #51 but that was funny), case is a coolermaster stacker, I'm trying to decide which processor and mobo to use and this was the first I had heard of possibly using a dual opteron and it sounds interesting as cadcam use is part of my goal but I need to learn a lot more. Thanks for your opinion since the WinXP64 is what I'm building the system for.
Neekotin - Friday, May 28, 2004 - link
yo guys, it just hit me. this is a high-end sys... why not get a white wall and good projector, imagine your monitor as the entire wall. ;)Ma10n3 - Friday, May 28, 2004 - link
#49, Did you take a look at the article listed in post #39?Oh, and I at least never claimed a dual-processor system gives you more "bang for the buck." I do believe it gives you quite a bit more mileage out of the hardware you purchase considering the direction Windows is heading (referring to Windows XP 64-bit edition, of course). Also, the benefit of doubling the memory bandwidth as well once WinXP64 is released (because of NUMA support) should increase performance in all applications, 32 or 64 bit. The legacy PCI bus is a severe bottleneck to all connected peripherals largely due to the fact that they all have to share the same bandwidth. Most of the newer dual-processor boards offer alternatives to just a single legacy PCI bus because of the chipsets they use and features of the AMD Opteron cpus.
Considering all of the above, I don't believe an Intel dual-processor system contains enough worthwhile features to justify the purchase.
Again, as far as the hard numbers, please refer to the URL listed in post #39.