Weekly Buyer's Guide: Cutting Edge System - March 2004
by Evan Lieb on March 3, 2004 12:57 PM EST- Posted in
- Guides
Cutting Edge System (continued)
Memory
Recommendation: 2 X 512MB Mushkin PC3500 Level One Dual Pack (CAS2)Price: $215 shipped
While companies like Corsair, OCZ and now Kingston are heavy favorites among high-end memory consumers, Mushkin is also starting to gain favor rapidly. While we haven't raved about Mushkin modules in previous reviews, we've been quietly impressed with their performance, reliability, and price. Unfortunately, it is getting harder and harder to find dual packs nowadays; but Mushkin Dual Packs are available at large vendors like Axion and Newegg at any rate, so they're still out there. We've been able to do lots of testing with these specific PC3500 modules and they indeed run stabily at PC3500 (433MHz DDR) on many currently available motherboards. There are many PC3500 modules that aren't capable of reliable DDR433 speeds on popular motherboards, so be wary. But motherboards such as the ASUS K8V Deluxe and ABIT IC7-G will run these modules very well, so we suggest that you take a look at them when purchasing your motherboard. However, don't get confused. PC3500 is not an officially sanctioned JEDEC spec, and therefore there are no motherboards on the market which can claim that they officially support PC3500 speeds. PC3500 is quite easily attainable with modern motherboards, but just be aware that PC3200, not PC3500, is the highest speed that your motherboard manufacturer will officially support under warranty.
Runner-up: 2 X 512MB OCZ PC3700 GOLD Revision 2 (CAS2.5)
Price: $265 shipped
After developing a reputation based on shoddy business practices, not to mention shoddy memory, OCZ has come roaring back and has gained wide acceptance among enthusiasts and average users alike after many months of wary purchasing and close inspection by hardware web sites like AnandTech. We've raved about OCZ modules in many reviews over the last few months (like this review), and have been extremely pleased with the results that we've been getting. OCZ modules have gone from disappointing and unreliable to impressive and dependable in what seems like an overnight transformation. OCZ still has a ways to go to gain acceptance among doubters who have never tried their memory or continue to hold onto conspiracy theories about their link to the OCZ of old, but we aren't placing OCZ's GOLD Rev. 2 PC3700 modules as runner-up based on whim, so take that to heart. The GOLD series is capable of a low CAS2.5 at DDR466 speeds (PC3700) and has a huge ceiling for overclockers. If you're not an overclocker, then obviously the GOLD series will not be of much value to you. If you are overclocking, just remember that you take a risk by overclocking your memory, both in terms of voiding warranties and damaging hardware. Beginners need not apply for overclocking.
Facebook
Twitter
RSS
41 Comments
View All Comments
NordicNINE - Saturday, May 1, 2004 - link
Don't aperture grill monitors have lower quality text? I'm looking at a 21"/22" monitor also right now and almost everything I read states that aperture grill monitors may have better graphics and brighter colors, they have lower text quality.Since the 1100DF is a high end shadowmask monitor, wouldn't it have better text?
How is the color brightness compared to the Phillips and the 1200NF?
pieman7 - Monday, March 15, 2004 - link
Evan,Thanks a bunch for your ealier response. Still regarding the Philips 202P45: You mentioned it's 2048 x 1536 max resolution. Online vendors I've seen selling this CRT also list this as its max. However, at the Philip's web site (www.consumer.philips.com) it lists the max resolution as 1920 x 1440. Who's right? Have you or anyone else been able to actually get it to display at this resolution?
demonbug - Monday, March 8, 2004 - link
Speakers/Sound card:First of all, why not go with an Audigy2 Platinum, since this is a cutting-edge system? It costs more, but gives you so many cool input options that it seems like it would be a great idea - you seem to have put together a great cutting-edge gaming system, but it might be nice to give it a little more versatility.
As for speakers, as several others have done, I would suggest Klipsch Promedias. I've only got the 2.1 system (I've had it for years), and it kicks the ass of every other speaker system I've heard (though I must admit I haven't heard either of the two you recommend outside of a store). Additionally, according to published specs by both companies, the Klipsch speakers have significantly better frequency response than the Logitech speakers, and much better THD than the Creative Labs speakers (10%???? Thats the worst number I have ever seen).
If price is the reason you recommended the ones you did, fine, just say so. From personal listening experience, the Klipsch speakers offer incredible sound quality (for computer/multimedia speakers - still don't compare to a stereo), and while I haven't heard the systems you recommend, the specs suggest that the Klipsch speakers are quite a bit better.
Evan Lieb - Saturday, March 6, 2004 - link
pieman7,I've only used the 1200NF and PF2141SB, not the P225FB. The 202P45 isn't quite as good as those, but that's more of a personal preference. Gaming is just as good and 2D text clarity MAY be worse with the Phillips. Overall, very little difference and certainly not worth $100. At least, that's IMO. Every monitor, even monitors that are of the exact same brand and model, can be significantly different in performance.
pieman7 - Friday, March 5, 2004 - link
Evan,I seem to be one of many who is in the market for a higher end monitor and your high praises for the Philips 202P45 got my attention. This is the first time I've seen any reviews for this CRT. It meets my price range, but am wondering how it compares to other 22in CRTs I've looked at:
Samsung 1200NF
Viewsonic P225FB
NEC FP2141SB
These CRTs are at about $100 or so more expensive, but in your opinion does the 202P45 still hold its own as far as picture quality, text clarity, and minimal geometric distortion? If so, then the 202P45 would seem to be a no-brainer choice.
Your thoughts very much appreciated.
Brickster - Friday, March 5, 2004 - link
Posted by Fink:"I would agree that it would likely be best to wait for 939 and an FX chip in Dual-Channel unbuffered configuration if you want the best and you're willing to wait 2 or 3 months for the hardware to appear. For now, FX51 is still the top performer. "
I agree. I have two top end games coming out this month that I have been waiting a long time for. However, upgradeability with the upcoming 939 is going to be the way to go for me, so looks like I am going to have to wait longer for my upgrade -- It's definitely worth the wait.
Wesley Fink - Friday, March 5, 2004 - link
While I do agree with Evan that the 3400+ is the best upeer value in any system you can buy (the 3200+ is the best value cpu - period), I believe Cutting Edge means the best you can buy. Since you can build the best performing machine I have ever tested for only $486 more, then Wes' Pick for CUTTING EDGE SYSTEM:Athlon 64 FX51 $745 (vs. $418 for 3400+) +$331
Asus SK8V $209 (vs. $139) +$70
1GB OCZ PC3500 ECC Registered (2X512MB)$300 (vs. $215 for 1GB unbuffered) +86
The FX51 with Dual-Channel ECC memory is STILL the fastest system you can buy, and the Asus SK8V is the best-performing motherboard I have ever tested. This FX51, Dual-Channel ECC system is not a lot faster than the 3400+, but for only $486 more (Total $2701) you can have the ABSOLUTE BEST instead of almost there. It is also Dual-Channel, and all of AMD's A64 performance systems will soon be DC with the move to Socket 939.
Since Socket 754 will be gone soon, I would also weigh the fact that Socket 940 has more longevity than the 3400+ system and will likely be around a while longer and STILL be a top performer with either FX or Opteron.
I would agree that it would likely be best to wait for 939 and an FX chip in Dual-Channel unbuffered configuration if you want the best and you're willing to wait 2 or 3 months for the hardware to appear. For now, FX51 is still the top performer.
Wesley Fink - Friday, March 5, 2004 - link
While I understand Evan's selections, I disagree with some of them, based on my reviews published at AnandTech, and testing that has not yet appeared in reviews.1 - My pick for top Athlon 64 motherboard would be the MSI K8T Neo, with the AOpen AK86-L as an extremely close runner-up at a lower price. Both are exceptionally stable and overclock well, with the AOpen a better overclocker. The Asus K8V is a decent A64 motherboard, but it is not a good overclocker and is not particularly stable in my experience.
2 - The Asus P4C800-E is the ONLY motherboard recommended by both Corsair and OCZ for DDR550. It is the best performing, highest overclocking, and most stable P4 motherboard I have tested and would be my recommendation. The runner-up would be the DFI 875B LANParty, which is the second best overclocking board I have tested and is also exceptionally stable and performs very well in Revision 2 clothes. I would also give high marks to the SiS-chipset Asus P4S800D-E. All three of these selections also have PROVEN complete compatibility with Northwood, Prescott, and Extreme Edition.
VIAN - Friday, March 5, 2004 - link
Sorry for posting a question already answered with the HDD issue.VIAN - Friday, March 5, 2004 - link
The Western Digital Raptor 36.7GB 10,000RPM SATA? Isn't that supposed to be the loser with a false promise. The great performance that it hyped up was only shown up with the 74GB version. I think that the 74GB version would be a way better buy.No second Optical Storage? What if you want to burn CD to CD or DVD to DVD?