The grey cover to the left of the chassis is actually the fan assembly, it features two 120mm fans designed to cool the CPUs and the rest of the chassis.  There is another fan located near the power supply at the top of the case that is not visible. 

To remove the fan assembly you need to remove the CPU heatsink cover to the right of it.  To remove the heatsink cover you need to remove the memory cage, and to remove it you need to remove two screws at the base of the memory cage.  Unfortunately, neither one of the screws wanted to move without also turning the metal standoff below it (a problem all DIYers have run into at some point). 


Click to Enlarge

There's not enough room between the base of the memory cage and the bottom of the case to get pliers in to hold the standoff while we unscrew the screw, so we were stuck.  We tried removing the screws with standoffs attached but we could not apply enough torque without stripping the screws and thus had to find another solution.


Click to Enlarge

Luckily there was enough play in the mounting of the memory cage that we could slide it back enough to unlatch the heatsink cover and remove it.  Amazingly enough we could do so without breaking any of the latches. 


Click to Enlarge


Click to Enlarge

With the heatsink cover removed, we could pull out the fan assembly (a flexible putty knife helps here to pry the fan assembly away from the front of the case while you pull it out). 


Click to Enlarge

Memory Expansion and FB-DIMMs Up Close Xeons Run Cooler than G5s
Comments Locked

96 Comments

View All Comments

  • plinden - Thursday, August 17, 2006 - link

    I know of at least one multithreaded LAME encoder for iTunes, but I've never used it so don't know how fast it is - http://www.versiontracker.com/dyn/moreinfo/macosx/...">http://www.versiontracker.com/dyn/moreinfo/macosx/...
  • Maury Markowitz - Wednesday, August 16, 2006 - link

    The MP3 process itself might not be, but the load -> encode -> write process most certainly is threadable.

    Maury
  • Questar - Wednesday, August 16, 2006 - link

    Reading and writing a file most likely doesn't use very much in system resources.
  • Dennis Travis - Wednesday, August 16, 2006 - link

    Good job Anand. I can't wait for the next part!!

  • WeirdZen - Wednesday, August 16, 2006 - link

    Something I have not seen mentioned is support for Video Cards. Now that these are using a different Bios, can we use standard PC Video Cards, or are we still forced to pay too much money for a slim selection of cards?
  • Maury Markowitz - Wednesday, August 16, 2006 - link

    The basic answer is "no, but it is likely you can make them work with some effort". There are two basic problems, one is the boot firmware on the card, and the other is the drivers in the Mac OS (or lack thereof). Both can be addressed, and have been in the past. Here's the scoop:

    The firmware on the basic PC card is basically aimed at getting a BIOS-based machine up and running. Since the Mac uses EFI, this doesn't work, and a PC card in a Mac simply won't boot (nothing bad happens though, just nothing happens). The Mac cards replace this BIOS-based code with one that appears to work fine on both BIOS and EFI machines. So basically a Mac card will work fine in any PC, but most PC cards will not run in the Mac. EFI is expected to become more common in the future though, so we'll have to see how this turns out six months from now.

    Now it's just firmware. That means you can download it from a Mac version and upload it to a PC version and presto. The problem here is that the combination on the Mac drive ends up being larger, which shouldn't be surprising. So while most PC cards have a 64k flash on them for the firmware, the Mac version is about 110k and needs a 128k flash. SOME PC cards have this, but generally it's rare.

    Things are not so bad as they seem. In the past hackers have been able to strip out the PC-only code, leaving a smaller Mac-only version that will fit into 64k. It will be a little while before we know if this is possible for the EFI driver too, it's simply too early to know yet. Another option is to solder a 128k flash onto your card, but obviously that's much more "serious".

    The other issue is the drivers in the Mac OS. Every card has a unique ID and vendor code in it, and the Mac OS tries to look up cards by pattern matching on these IDs. So even if you did flash the firmware, the Mac wouldn't find the driver matching those codes, and fail to load it. The news here is very good though, because Apple puts practically everything into normal text files, including these codes. It's a triviality to find them in the driver and change them to match your card.

    So we'll all just have to wait a bit and see how it all turns out. The basic long-n-short is that its definitely _possible_ in theory.

    Finally, a word or two about SLI/CrossFire. These are a different matter entirely. Basically these systems use custom drivers that split every message being sent out of the video drivers and sends them to both cards at the same time. That way they both have an identical copy of the "world". Clearly the normal drivers cannot be used, and unless someone makes a driver for the Mac, these things simply aren't going to work.

    There is one oddball though, the GeForce 7950 GX2. This card is basically two 7900's bolted together, with SLI _internal_. From what I understand, the machine and OS has no idea that it's not talking to a bog-standard 7900. Assuming all the problems above can be worked out, it is just possible that the Quattro driver Apple has now could be adapted to work with this card. THAT would be good enough for me, Halo runs full-screen on a 30" LCD on this card...

    Maury
  • Pirks - Wednesday, August 16, 2006 - link

    yeah Anand please tell us if we can buy nice cheap evga 7900GT and stick it inside this fruity beast
  • VooDooAddict - Wednesday, August 16, 2006 - link

    I think this is a burning question amoung those of us thinking about this beast.
  • ViRGE - Wednesday, August 16, 2006 - link

    Early results look like it won't happen. For Mac OS X, the card needs to support EFI, which means there needs to be a portion of the video BIOS programmed to handle it. Right now only Mac-specific cards seem to be able to do so, and PC cards can't be flashed because the Mac cards are using a larger EEPROM for the BIOS.
  • delta53 - Wednesday, August 16, 2006 - link

    They go on and on about the price difference and fail to tell you that the Apple doesn't include at monitor or a protection plan which the price of the dell includes both. The price for the apple plan is $249 for 3 years. Dell will take off $149 for the monitor. Therefore, the Apple with protection plan without monitor is $2748.00 and the Dell with the protection plan without monitor is $2961.00. Price difference $213.00. That is comparing apples to apples.

Log in

Don't have an account? Sign up now