CPU and Motherboard Alternatives

CPU: AMD Athlon XP 2500+ (retail)
Motherboard: ABIT NF7-S Rev.2 (nForce2 Ultra 400)
Price: CPU - $80 shipped (retail). Motherboard - $86 shipped



For an additional $28, you can purchase an Athlon XP 2500+, which runs at 1.83GHz on a 333MHz DDR FSB and comes with a 512K L2 cache, over the Athlon XP 2000+, which runs at 1.67GHz on a 266MHz DDR FSB and comes with just 256K L2 cache. So, in contrast to the Athlon XP 2000+, the 2500+ runs roughly 167MHz faster, comes with double the L2 cache, and has a FSB that is 67MHz faster. All this adds up to noticeably better performance that, depending on what applications are run, you may or may not notice. You will be receiving a better performing processor with the 2500+. Just don't be surprised if the extra $28 doesn't net you a compellingly different experience from the 2000+. Gamers will probably benefit the most from the addition of clock speed, FSB and L2 cache increases with the 2500+, so keep that in mind.

There are other subtle differences between the Athlon XP 2000+ and the 2500+ that are worth noting here, like the 2500+'s higher Vcore (1.65V instead of 1.60V) and larger die size. The Athlon XP 2500+ also is quite an excellent overclocking CPU, and has been for months now, even though they are shipping multiplier locked these days. You may want to check out AMD's mobile version of the 2500+, details of which you can find here.



In a lot of ways, the ABIT NF7-S Rev.2 (also known as the ABIT AN7) is a beefier version of the ASUS A7N8X-X. This is primarily due to the NF7-S Rev.2's better feature set, which includes SPDIF, an MCP-T South Bridge for superior sound, and a dual channel DDR capable chipset in the nForce2 Ultra 400 (versus just the nForce2 400, non-Ultra, found on the A7N8X-X). The price delta between these motherboards has shrunk from $29 to just $17 now. Yes, that's right, the NF7-S Rev.2 has dropped in price over the last month by $12. That's quite a drop, and a welcome one at that. Pushing SATA into the low end mainstream is very important for the development of that technology, too. And if you're at all interested in overclocking, the NF7-S Rev.2 is certainly the cream of the crop along with perhaps the DFI NFII LAN Party series.

Listed below is part of our RealTime pricing engine, which lists the lowest prices available on the Intel CPUs and motherboards from many different reputable vendors:



If you cannot find the lowest prices on the products that we've recommended on this page, it's because we don't list some of them in our RealTime pricing engine. Until we do, we suggest that you do an independent search online at the various vendors' web sites. Just pick and choose where you want to buy your products by looking for a vendor located under the "Vendor" heading.

CPU and Motherboard Recommendations Memory and Video
Comments Locked

27 Comments

View All Comments

  • Tostada - Monday, May 24, 2004 - link

    Yes, most people prefer the name "ASUS" to the name "Biostar," but this is a budget system. Are you honestly suggesting you'd rather have a system with half the memory, half the storage, no dual-channel, and no ability to read DVD's?

    We're talking about best bang for the buck here.
  • guitarizt - Friday, May 21, 2004 - link

    I'd rather have the asus than the biostar.
  • Tostada - Tuesday, May 18, 2004 - link

    People seem to absolutely love Samsung drives. It looks like the SpinPoint 80GB with 8MB cache has almost identical performance to the WD 800JB, but I can't even find anybody selling the ATA Samsung drive with 8MB cache. Having a 2MB cache shouldn't make much difference, though, so I'll have to try one.

    It is pretty stupid that WD isn't using FDB like everyone else, and they actually list the 800JB as a 2-platter 4-head design, which would really hurt its transfer rate compared to modern 80GB-platter drives, although WD does change configurations without changing the model number, so you never know what they're using.

    Hitachi's SATA drives all have a 3-year warranty and 8MB cache, and I use them whenever I can. They're the fastest 7200RPM drives around -- almost as fast as the new Raptors and even quieter than Samsungs.
  • Zebo - Tuesday, May 18, 2004 - link

    I with Tostada. Excellent work.:)

    Especially the Biostar mobo combo. I would change the HD to Samsung spinpoint simply because they are quieter:)

  • XRaider - Tuesday, May 18, 2004 - link

    Good point Tostada. I will have to agree with you on the entry system that you have proposed. Parts are alil better.
  • Tostada - Monday, May 17, 2004 - link

    Seeing as I just built one of these, I'll post the entry-level system I would make. Let's compare the prices without speakers or monitor.

    AnandTech Entry Level system:
    Athlon XP 2000+ OEM
    Cooler Master DP5-5G11A heatsink
    ASUS A7N8X-X nForce 2 400 motherboard
    Sapphire Radeon 9200SE 64MB
    Western Digital 40GB WD400BB, 1-year warranty
    256MB Kingston ValueRAM, PC-3200 CL3
    Sony 52X CD-RW drive
    CasEdge 3GTS-01 Black ATX case

    That's $382.00 listed in the guide. The parts are currently $368.99 delivered from NewEgg.

    The machine I would build:
    Athlon XP 2000+ Retail
    Biostar M7NCG 400 nForce2 IGP dual-channel
    Western Digital 80GB WD800JB, 3-year warranty
    512MB Mushkin PC-3200 CL2.5
    Lite-On 48X CD-RW / 16X DVD-ROM combo drive
    APEX TM-163 Black Micro-ATX case

    That's currently $372.00 delivered from NewEgg.

    Upgrades I recommend for a silent system are the EnerMax Noisetaker 325W power supply and the Arctic Cooling Copper Silent 2TC Rev2 heatsink.

    Maybe you could argue that 2D quality is a little better on the Radeon, but the 9200SE is a 64-bit card with a 200MHz core, it is only a DirectX 8 card, and it doesn't perform any better than the on-board graphics on nForce2 IGP boards.

    The guide has chosen to use an older model 40GB hard drive with a 1-year warranty, when it is only $13.50 more for the 80GB model with a 3-year warranty and 8MB cache. They have chosen to use 256MB of CL3 Kingston ValueRAM, when it's only $37 more for 512MB of Mushkin CL2.5. They have chosen to get a plain CD-RW drive when it's only $15 more for a combo DVD-ROM. In light of that kind of hardcore penny pinching, it's very questionable to spend an extra $40 for a Radeon 9200SE.
  • Tostada - Sunday, May 16, 2004 - link

    SxRxRnRx: That places prices are certainly decent, but you don't get a monitor or an operating system, so you're not doing better than building it yourself.

    The parts in CyberPower's $424 system you speak of would cost $342 delivered at NewEgg. That's everything but the case and speakers, which you can certainly get for less than $82.

    Athlon XP 2600+: $90.00 (Retail)
    ASUS A7N8X-X: $76.00
    256MB PC3200: $46.00 (Apacer)
    80GB 7200RPM drive: $67.00 (WD800BB)
    Nvidia GeForce 64MB Video: $36.00 (GeForce2 MX400)
    52X CD-RW: $27.00 (Samsung)

    It would be much better to build a system yourself, because that thing is stupid. Why would you get a Barton 2600 with only 256MB and a GeForce MX? The Anand guide has things a little more in perspective.

    Personally, for an entry system, I would go with the 2000+ (or maybe the Mobil 2000+) like the guide says. I would go with an nForce2 board. I would usually go with 512MB. I can understand saving $45 on memory, though, if you really think you won't need it. I would always get a HDD with a 3-year warranty. I also think it's ridiculous to build a new system that can't read DVD's.

    I have to agree with the guys suggesting onboard video for an entry-level system. There's nothing wrong with the nForce2 IGP. You guys complaining about 2D quality are confused. Most people using entry-level systems are running their desktops in 1024x768 at the most. Often they just use 800x600. These are the types of people who are more than happy playing games with the horrible "Intel Extreme Graphics." Any "SE" or "MX" video card with a 64-bit memory bus will not significantly outperform the nForce2 integrated GeForce4 MX. It's just a waste of $35.

    If you're that concerned about perfect 2D quality, you should at least spend the extra $5 to get a Radeon with a DVI connector. Then if you get a good monitor you actually will be able to notice the difference.

    The Biostar M7NCG 400 is a great nForce2 Micro-ATX board. It's $64.00 delivered. It has the onboard GeForce4 MX. It supports dual-channel memory. It fits in cute cheaper Micro-ATX cases that everybody likes. It also uses the same Realtek 6-channel audio as the board in the guide.

    Speaking of on-board audio, it is still something you have to consider. A lot of boards now have cheaper sound chips and totally unshielded jacks that give a constant hum.
  • gordon151 - Sunday, May 16, 2004 - link

    Athlon XP 2500+ Retail - $80
    ABIT VA-10 KM400 mATX mBoard - $53
    In-Win Black mATX Tower Case - $50

    Mid and full tower ATX cases are a little too bulky for my tastes in use of an entry level computer.
  • scuzzmaster - Sunday, May 16, 2004 - link

    as an alternative, i've used msi's km4m with good luck for customers before, and it runs about $10 less at newegg. with decent (imo) integrated graphics, it's a popular mobo swap for aging customer systems.
  • Zebo - Saturday, May 15, 2004 - link

    Oh and don't forget to include shipping. Some guys promote Dells "specials" and fail to mention thier shipping is around $150 sometimes.

Log in

Don't have an account? Sign up now